SPEC |
OUTPUT |
2600W |
FREQUENCY |
15KHz |
20KHz |
LINE SOURCE |
AC220V ,15A, 50/60HZ,single-phase |
POWER
SYSTEM |
ULTRASONIC
SYSTEM |
- Automatic frequency self-checking at startup
|
- Automatic frequency control, no need to adjust the horn’s resonance
|
- Resonance frequency compensation during the welding cycle to improve welding ability
|
- Full-Bridge IGBT modules are used in the generator to improve durability
|
- PWM (Pulse Width Modulation) amplitude control
|
- PWM (Pulse Width Modulation) startup vibration control to avoid horn shaking during high voltage startup and protect the horn
|
|
- Protection against ultrasonic frequency deviation, high voltage and over current
|
- Frequency compensation as horn’s working temperature increased
|
- LED displays the percentage of ultrasonic power loading
|
CONTROL
SYSTEM |
- 7”Touch screen set and display welding parameter and abnormal message
|
- Programmable control processing and calculation of various welding status
|
- External USB, Copy weld history files to a EXCEL format
|
TRIGGER MODE |
- Trigger mode can set trigger pressure by variable resistor
|
TIME MODE |
- Setting delay /welding/holding time by HMI
|
DISTANCE MODE |
- Setting welding distance and display the position by HMI
|
ENERGY MODE |
- Setting welding energy and display the energy result by HMI
|
MECHANICAL SYSTEM |
|
- CYLINDER:Ø63mm / ● STROKE:75mm
|
|
- Distance control by encoder, precision 0.01mm
|
- Synchronous dual start button & cylinder up / ultrasonic emergency stop button
|
|
- Use the rotating scale knob to adjust the downward position of the horn, which does not hinder the disassembly of the horn
|
|
GENERATOR DIMENSION |
|
GENERATOR WEIGHT |
|
MACHINE DIMDENSION |
- 677×408(+240~380) ×1040~1400mm (L×W×H)
|
MACHINE WEIGHT |
|